home page

External Wall Protection
ApcoBuild Crackseal + ApcoBuild Beauty Guard + ApcoBuild Seal N Safe
  • Dismantling of existing plaster to be done only in case of unsound plaster.
  • If the plaster is sound but is porous and have cracks then wire brush, clean the complete surface and treat the cracks up to 5 mm with ApcoBuild CrackSeal &  for cracks above 5 mm, fill with PMM prepared by using 10% ApcoBuild Seal N Safe on the weight of cement with  cement sand ratio of 1:3.
  • The separation joints between RCC member and brick masonry to be suitably grouted
  • Pre-wet the surface to achieve the SSD condition before application of coating.
  • On the prepared external plastered surface as above apply the primer coat of ApcoBuild BeautyGuard diluted with potable water in the ratio of 1:1. and allow it to dry for 2-3 hours.
  • Apply two coats of ApcoBuild Beautyguard on the above primed surface with intermediate drying of 4-6 hours.
  • Application of the second coat to be carried out in perpendicular direction of the first coat.
Please ensure the applied coating is protected from water at least for 3 days from the time of application for curing of coating
>Download Pdf Files For External Wall Protection
More resources > > >
Disclaimer: These suggestions and data are based on information which we believe to be reliable. They are given for information only and in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the user determines the suitability of our materials and suggestions before adopting them on a commercial scale.