home page

Internal Wall Dampness
ApcoBuild DryMajik
  • Remove existing paint and clean the surface to remove all loose materials. If required the surface shall be washed with clean water.

  • If the plaster is loose and has cracked at many places, it shall be removed and re done. Re-plaster in patches also can be considered.
  • Any cracks on plaster having width less than 5mm shall be filled with ApcoBuild DryMajik putty made out of mixing 1 part of ApcoBuild DryMajiK and 3 parts of white cement..
  • Cracks larger than 5mm shall be filled with ApcoBuild Seal N Safe  Polymer modified mortar (a site mortar of cement:sand (1:3) with 10% ApcoBuild Seal N Safe on the weight of cement.
  • Apply a primer coat of ApcoBuild Hydrocrete Plus in ratio of 1:1 with water with coverage of 120 – 150 Sft per kg.
  • After 3 hrs of application of primer coat, apply first coat of ApcoBuild DryMajik coating.
  • Apply second coat in similar way after 5-6 hrs of application of first Coat.
  • The approximate area that can be covered in 2 coats is around 40-45Sqft/kg. The actual coverage may vary depending upon the surface texture.
  • In case of seepage caused due to plumbing rectify same.
  • Not recommended for Rising Dampness.
  • Take suitable precaution to arrest seepage from source.
>Download Pdf Files For Terrace Water Proofing
More resources > > >
Disclaimer: These suggestions and data are based on information which we believe to be reliable. They are given for information only and in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the user determines the suitability of our materials and suggestions before adopting them on a commercial scale.