home page

Concrete Curing
ApcoBuild Crete Cure SB
  • Surface to be treated should be clean and free from dirt, oil and other loose material and free of surface water.
  • ApcoBuild Crete Cure SB can be applied to the surface of newly hardened concrete immediately after de-moulding.
  • The spray nozzle should be held approximately 50 cm from the concrete surface and passed back and forth to ensure complete coverage.
  • Spray apply the coating at a rate of 3 to 4 m2 per kg.
  • Pump pressure should be maintained to give an even, fine spray.
  • After spraying, no further application of water or other material is necessary to ensure continued curing.
  • The concrete surface should not be disturbed until it has sufficient strength to bear surface loads.
  • The applied film should not be trafficked until it is fully dry, care should also be taken to ensure that the film is not subsequently broken.
>Download Pdf Files For Waterproofing
More resources > > >
Disclaimer: These suggestions and data are based on information which we believe to be reliable. They are given for information only and in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the user determines the suitability of our materials and suggestions before adopting them on a commercial scale.