home page

External Wall Plaster Cracks
ApcoBuild CrackSeal   +   ApcoBuild Hydrocrete
  • Surfaces to be applied upon, must be clean, reasonably dry, free form dirt and loose material.
  • Unsound plaster to be removed and re-plastered using ApcoBuild Hydrotite IWC
  • All cracks shall be opened to ā€œUā€ groove slightly extended to the area of cracks and filled using ApcoBuild CrackSeal or putty made out of cement and ApcoBuild HydroCrete.
  • On the well prepared surface and cracks attended to along with the separation gap treatment with suitable grouting, apply ApcoBuild BeautyGuard waterproof coating.
  • ApcoBuild BeautyGuard to be applied in two coats over primed surface using ApcoBuild BeautyGuard diluted with water in the ratio of 1:1
  • Use of bond coat is recommended with ApcoBuild Hydrocrete mixed with cement in the ratio of 1:1 for replastering.
>Download Pdf Files For Waterproofing
More resources > > >
Disclaimer: These suggestions and data are based on information which we believe to be reliable. They are given for information only and in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the user determines the suitability of our materials and suggestions before adopting them on a commercial scale.